|
|
|
|
Nearly Perfect Replacement Rubber Bulb for Circular, Large, Small and Straight Horns Large Bulb fits virtually all the popular bulb horns...this is the low-cost bulb you've been looking for. Just screw it on and start honkin'!
25% OFF!
Get 25% ($2.75) OFF these nearly perfect bulbs that might show a minor flaw such as a size, shape or cosmetic issue, or for some reason do not meet the standard of our regular bulbs. Some flaws might be obvious, such as a slight dimple or dent in the rubber. Some flaws you might never find at all. But no matter what kind of flaw, you save extra cash on these bulbs that work just fine.
Save even more—
50% OFF: Scrunched Bulbs
75% OFF: Blemished, Battered & Flawed Bulbs
Not-So-Scrunched Bulbs
Some of these bulbs might have formerly been Scrunched Bulbs that self-healed and transformed into Nearly Perfect—or even first-quality bulbs. A few could sport minor dents. But each bulb is Fully Guaranteed and you must be absolutely delighted with an upgraded bulb or we will send your choice of an immediate replacement or full refund.
Fully Guaranteed:
The dented or collapsed rubber on these bulbs tend to self-heal over time. So the "nearly perfect" bulb you get is likely to morph into a first-quality bulb before you know it. But no matter. These bulbs are fully guaranteed to meet your satisfaction so there is absolutely no risk.
Make that Old Horn Squawk Again!
Large replacement bulb delivers extraordinarily loud honk for Circular, Large, Small and Straight horns. (does not fit Double Bell or Mini horns).
Bulb measures a substantial 3-3/4 inches (9.5 cm) in diameter by 5-1/4 inches (13.3 cm) in length to end of brass collar. Total length to tip of brass tube is approximately 7-1/4 inches (18.4 cm) (varies). Designed for 3-part brass bulb horns (bulb-reed-horn). Spare brass reed available separately if needed.
IMPORTANT:
Reed screws into horn, not the bulb. So if your reed screws into bulb, then our bulb will not work. (Yes, the reed slides inside bulb tube. But reed is physically attached to horn.)
Large or Mini? We offer bulbs in just two sizes: Large and Mini. Large is the "standard size" bulb and fits most bulb horns. The Mini is designed for little "bicycle-size" horns. The Double Bell Bulb is just a Large Bulb with a longer tube.
Note:
A Mini Bulb does not generate enough blast for standard size horns. So even if our Mini Bulb fits your standard size horn, you should find a bulb designed for your specific horn instead (prices typically start at $20.00), or retrofit Large Bulb.
How to Choose the Bulb Size you Need
Measure Bulb Tube:
- If outside diameter is 11/16" (17.5 mm), then get Large bulb.
- If outside diameter is 5/8" (15.9 mm), then get Mini bulb (see note above).
Measure Brass Fitting:
- If horn fitting OD is 5/8" (15.9 mm), then get Large bulb (same as Large bulb tube ID).
- If horn fitting OD is ~9/16" (14.3 mm), then get Mini bulb (same as Mini bulb tube ID).
Measure Bulb:
- If bulb circumference is 11-1/2" (29.2 cm), or length from base to neck is 5-1/4" (13.3 cm), then get Large bulb.
- If bulb circumference is 8-3/16" (20.8 cm), or length from base to neck is 3-1/4" (8.2 cm), then get Mini bulb.
Need more product specs? Click "Technical Specs" tab above for detailed factual data.
Bulb Size Comparison
Mini Bulb (top) Large Bulb (middle) Double Bell Bulb (bottom)
Order this Guaranteed Bulb and Save Cash!
Fits These Horns: This
replacement bulb fits all kinds of vintage car, taxi, antique,
old-brass and clown horns. Also fits Dobani bulb horn product code:
BULL, BULS, BULH, BULD, and BULO. So if you need to replace a crumbly
ol' horn bulb, then this fully guaranteed low-cost Spare Rubber Bulb is
what you've been looking for.
- Low cost—economical
- Black rubber
- Solid brass fittings
- Large 3-3/4" (9.5 cm) diameter bulb
- Generates loud honk
Tested and Certified Inspected, Bench-Tested and Guaranteed to Work
Each bulb is visually and physically inspected, compression-tested and quality approved. Your bulb must successfully pass the inspection process—and cannot ship without a valid certificate to prove it. Last time we checked, no other seller tests their bulbs at all, yet alone to these stringent standards...
SEVEN POINT Bargain Bin Bulb Inspection:
Bone Dry Music
Certified—
1. Nearly perfect
2. No significant defects
3. No leaks or pin holes
4. No scrunched rubber, but maybe dents
5. Screw fitting seats properly
6. Compression test generates strong blast
7. No risk, fully guaranteed
|
Buy with Confidence Largest Bulb Seller on eBay, and Just About Everywhere Else There's a good reason why so many shoppers order their bulbs and bulb horns from Bone Dry Music. Actually, there's at least three good reasons:
- You get comprehensive product info: We do our best to give you all the info and facts you need so there are no surprises when you open the box.
- We're easy to deal with: Got a problem with your order? We take care of you.
- You get a good deal: Go ahead and shop around. Our prices are about as good as it gets.
What's more, your order is expertly boxed and packed. And ships quick too—usually within one business day.
Good Deal for Thrifty Shoppers...Satisfaction Guaranteed
These are rather excellent products for the price. But they ain't fancy high-class articles. Most of the bulbs are just fine and you can expect them to serve you well for at least a year or two, maybe more. But if the bulb you get does not meet with your satisfaction, then you can count on us to make things right.
Order Worry-free Our bulbs are inspected, pre-tested, treated with rubber protectant and fully guaranteed. We'll have your horn up and honking again before you know it. Order now and discover why more than 1,541 smart eBay and Amazon shoppers demand guaranteed bulbs from Bone Dry Music.
Now you're honkin'!™
Figures are approximate (but pretty darn close)--
- Bulb Diameter: 3-3/4" (9.5 cm)
- Bulb Circumference: 11-1/2" (29.2 cm)
- Bulb Length to end of brass collar: 5-1/4" (13.3 cm)
- Bulb Length to end of brass tube: 7-1/4" (18.4 cm) (varies)
- Brass Tube Length: 1-1/2" (3.81 cm) more or less
- Brass Tube ID (Fitting): 5/8" (15.9 mm) at 28 tpi (threads per inch)
- Brass Tube OD: 11/16" (17.5 mm)
- Three-part Construction: Rubber bulb, brass collar, threaded brass tube.
- Weight: 5 oz (141.75 grams)
- Composition: Brass and rubber
- Country of Origin: Pakistan
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Large Bulb: Produces substantial honk.
- Durable Construction: Built with tough rubber, brass fittings.
- Just Screw-on and Honk: Fits Circular, Large, Small and Straight (not Mini) horns.
- 3-Part (bulb-collar-tube) Construction: Lets do-it-yourselfers modify bulb.
- Traditional Design: Like you might find at a fine antique shop.
|
|
|
|
|
|
|